Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Kenwood?
Spring replacement in Kenwood typically costs $180 – $340 for a single torsion spring, including the labor to install it. If both springs are replaced as a matched pair, which is the usual approach when one fails, expect roughly $360 – $680. We write a free estimate before any work starts, and that written estimate sets the final price for your door.
Those numbers cover the spring itself, the winding and tensioning, and a basic safety check of the door’s balance. They don’t cover a broken cable, a bent track or an opener fault found during the same visit, which we’d flag for you with its own price before touching anything. Call (844) 699-3427 and we’ll book a free estimate.
Key takeaways
- One torsion spring: typically $180 – $340 in Kenwood.
- A matched pair: roughly double that, $360 – $680.
- Cost moves with spring type (torsion vs. extension), door weight and whether cables or drums are worn.
- Springs are high-tension components; we don’t recommend adjusting or winding them yourself.
- Estimates are free and written. Call (844) 699-3427.
Spring Replacement Cost Breakdown (2026)
Here’s how the pieces stack up for spring work in Kenwood. These are typical estimated ranges for our area, and the written estimate sets the final price.
| Line item | Typical estimated range |
|---|---|
| Single spring replacement (one torsion or extension spring, parts and labor) | $180 – $340 |
| Matched pair of springs | $360 – $680 |
| Broken cable, replaced alongside the spring | $130 – $250 |
| Track realignment after a spring failure knocked the door off balance | $120 – $240 |
| Roller replacement, if seized rollers are straining the new spring | $110 – $220 |
| Panel replacement, if the door dropped and dented a section | $250 – $500 |
| Opener repair, if the opener ran hot against a heavy door | $120 – $320 |
| General garage door repair call that covers the balance and hardware check | $150 – $600 |
The spring line is the core of the job. Everything else on that list only applies when the door has a second problem, which happens more often than people expect: a snapping spring puts a sudden load on cables and rollers, and a door that’s been running on a weak spring for months wears the opener. We check the whole door during the estimate so you’re not paying twice for a call that could have fixed both issues.
We work on every major brand already in the garage. LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor doors and openers all come through our estimates, and a brand name on the panel doesn’t change the spring cost. What changes it is the door itself.
What Affects Spring Replacement Pricing in Kenwood
Two doors on the same street can land at opposite ends of the range. Here’s what pushes the number up or down.
- Torsion or extension. Torsion springs sit on a shaft above the door and carry the full load; they take more skill and a little more time to wind safely, so they sit higher in the range. Older Kenwood homes with extension springs running along the tracks are usually at the lower end.
- Door weight and height. A single-car door with a light steel panel needs lighter springs. A double-wide insulated door, common in Florida builds where the garage faces the sun, needs heavier springs and sometimes two of them, which moves you toward the pair price.
- One spring or two. Many doors carry two springs designed to share the load. When one breaks, the other has usually done the same work for the same years, so replacing both at once is the standard call. That’s why the pair price exists: about twice the single.
- Condition of the rest of the door. Frayed cables, worn drums, seized rollers and a bent track all add labor. None of it is upsell; it’s the stuff that fails next if it’s left.
- Cycle life of the replacement spring. Springs are rated in cycles, meaning how many open-and-close runs they’ll take. A higher-cycle spring costs more up front but lasts longer. In a Kenwood household where the door runs several times a day, that math favors the better spring.
- Access and clearance. A garage packed to the ceiling, a low clearance above the door, or a door that won’t open at all (so we’re working around a car parked inside) adds time. Clear the area before we arrive and you keep the job at the low end.
Why Springs Fail in Kenwood
Springs don’t fail because of bad luck. They fail because of cycles, and a garage door in Kenwood racks up cycles fast. Most households here use the garage as the front door: in and out in the morning, again at the end of the day, plus errands and deliveries. That daily grind is what wears the steel, and it’s the same story whether the house is off a quiet residential street or a busier corridor. There’s no winter cold to blame; the heat and humidity of a Florida summer do put stress on the steel and on the lubricant inside the coils, and a dry, grinding spring wears faster than one that’s been kept clean.
When a spring goes, you’ll usually hear it: a sharp bang from the garage. The door may feel suddenly heavy, may only open a foot, or may not move at all. Stop pulling on it if that happens. A door with a broken spring is being held up by the opener and the cables alone, and running the opener against that load can burn out the motor or drop the door.
That’s the point where a lot of homeowners call us. If that’s where you are right now, our garage door repair Kenwood team handles the full diagnosis, and our spring replacement service is exactly this job.
How a Spring Replacement Visit Usually Goes
We start by looking at the whole door, not just the broken spring. We check the balance by hand, look at the cables and drums for fraying, check the rollers and hinges, and put a level on the tracks. Then we give you a written estimate covering the spring and anything else that needs doing, split out line by line so you can decide what to approve now and what can wait.
If you approve, we release the tension safely, remove the old spring, install the new one rated for your door’s weight, and re-tension it. Then we run the door through several full cycles, check the balance again, and adjust the opener’s travel and force settings so the motor isn’t straining against a door it thinks is heavier than it is. Most single-spring jobs are finished in one visit. A pair with cable work takes longer, and we’ll tell you upfront how long to expect.
We handle this across every major brand: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. If your door already has one of those names on it, we’ve worked on the same equipment before.
How to Save on Spring Replacement
There’s no coupon needed to keep the cost down. Most of the savings come from how you approach the job.
- Fix it before it breaks. If the door is getting loud, slow to lift, or the spring looks stretched and gappy, get an estimate now. Replacing a spring on a working door is the $180 – $340 job. Waiting until it snaps can add cable or panel work on top.
- Replace both springs at once if your door has two. It sounds like more money, and it is on the day, but doing them one at a time means paying for two visits and risking a second failure shortly after the first.
- Clear the garage before we arrive. Access time is labor time. Move the car out and clear the area under the door and you’ll keep the estimate tight.
- Ask about cycle rating. A higher-cycle spring can cost more up front and last longer in a busy household. Worth the conversation.
- Handle smaller items in the same visit. If the rollers are shot or a track is out of line, having it done while we’re already there usually beats a separate call later.
Estimates are free, so there’s no cost to finding out where your door actually stands. Call (844) 699-3427 and we’ll book a time.
Repair or Replace: When a Spring Job Turns Into a Door Decision
Sometimes the spring is the least of it. If the door has cracked panels, a bent track that won’t straighten, or the opener is on its last legs too, the math can shift toward a new door. A full new door installation typically runs $700 – $2200 in Kenwood, depending on size and style. That’s a different budget from a spring replacement, so it’s worth knowing where the line is.
A spring replacement rarely justifies a new door on its own. A door with good panels and solid tracks is almost always worth fixing. When the structure itself is failing, though, we’ll tell you plainly, with numbers for both paths, and let you decide. No pressure either way.
Safety: Why We Don’t Recommend DIY Spring Work
Torsion springs store an enormous amount of energy, and they release it fast. A wound spring under load can injure hands, arms and eyes in an instant if a winding bar slips or a cable lets go. This is one of the few garage door jobs we tell homeowners not to attempt, even handy ones. The tools are specialized, the tension is unforgiving, and there’s no margin for a guess. If a spring is broken or the door is stuck, keep people and pets clear and call us. Our technicians have up to 8 years of experience with these components, and that’s the kind of hands-on time this job calls for.
Emergency Spring Failure: What to Do When the Door Won’t Move
A spring failure doesn’t wait for a convenient morning. If your door is stuck open, your car is trapped inside, or the door won’t close and the house is open to the street, that’s an emergency call in our book. Emergency garage door service is a core part of what we do, not an add-on. Call (844) 699-3427 and we’ll get a technician out to assess and, in most cases, get the door working again. If the spring can’t be replaced on the spot, we’ll secure the door so your home isn’t left open overnight.
Brands We Service
Spring work is brand-agnostic in principle and brand-specific in practice. A LiftMaster opener with an integrated myQ module needs its force settings adjusted a certain way after a spring change. A Clopay or Amarr door has its own panel weight and track geometry. Chamberlain, Genie, Wayne Dalton, Craftsman and Raynor all have their own quirks too. We’ve worked on all of them. If your garage already has one of these names, you don’t need to explain your setup from scratch. One call covers the spring and whatever the door needs next.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Kenwood?
A single spring typically costs $180 – $340 in Kenwood, and a matched pair runs about $360 – $680. The written estimate sets the final price. Call (844) 699-3427 for a free estimate.
Is it cheaper to repair or replace garage door springs?
Repairing, by a wide margin. A spring replacement at $180 – $340 for one spring is far less than a new door installation at $700 – $2200. Replacement only enters the picture when the door’s structure or panels are also failing. Call (844) 699-3427 and we’ll give you both numbers if it’s a close call.
Can you replace a broken spring the same day?
In most cases, yes. Spring replacement is one of the faster jobs we do, and with the right spring on hand it’s often finished in a single visit. Call (844) 699-3427 early in the day and we’ll do our best to fit you in.
Why does a matched pair cost about twice a single spring?
Because a pair is two springs, two installations and twice the labor. Doors with two springs share the load between them, so when one fails the other is usually the same age. Replacing both together at roughly $360 – $680 costs less than two separate single-spring visits later. Call (844) 699-3427 to confirm which setup your door has.
Do I need a permit for spring replacement in Kenwood?
Spring replacement is generally treated as a repair, not a structural change, so most homeowners don’t need a permit for it. Rules can vary, so if you want to be certain, ask the city’s building department. Either way, call (844) 699-3427 for a free estimate and we’ll handle the technical details.
What if the door is stuck open and I have to leave for work?
Don’t force it. Call (844) 699-3427 and we’ll get a technician out. In the meantime, keep people and pets away from the door and don’t run the opener against a heavy door, which can burn out the motor.
Get a Free Spring Replacement Estimate in Kenwood
You’ve got the numbers. A single spring runs $180 – $340, a pair about $360 – $680, and the written estimate sets the final price. We offer free estimates, upfront pricing, and a satisfaction guarantee on the work. Our technicians have up to 8 years of experience with high-tension spring work, and we service every major brand on the door you already own. Call (844) 699-3427 to book your free estimate and get your garage door working again.
Pricing reflects the Kenwood market as of 2026. Garage Door Repair Kenwood offers free estimates – call (844) 699-3427.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Jennifer Parker"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Emily Fletcher"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Nia Nash